Installation Guide

PRO NOTES :When determining Fig.17
the lean of a hole
simply stand
over the hole
you are about to
drill then look at
the hole in front
of you. If you
connected all
three holes with
a triangle. The
point of the
triangle indicates
the direction
of lean. The further away from
the imaginary
line the more of
a lean.If it
doesn't make a
triangle then it is
level.
Step3: Drilling and Inserting Ground Sleeves
* Recommended Drill Guide: We have an optional drill guide
that will help you with drilling holes needed for proper
installation.
Align: the drill guide over the marked hole with the bubble level pointing to
the
pool edge.(See Fig.DG1) Leve: the drill
guide.The three bolts attached to
the bottom of the base allow the
user to level the drill guide. Simply
turn the bolts clockwise or counter
clockwise.(See Fig.DG2)
Lean: the guide either away from the pool, toward the pool,
or at the zero mark for level drilling. To adjust the pitch
simply loosen the upper wingnuts on either side of the drill
guide.(See Fig DG3 & DG4)
Heavy or Light Lean: The
tick marks on the side of
the drill guide by the wing
nut will show you what a