Installation Guide

in Fig.32. Use the latch for
leverage. Then disconnect
the latch from the screw eye
and turn the
other screw eye in using the latch for leverage. Make sure
both screw eyes are tightened until there are no visible threads.
The fence works on tension so you
must squeeze the poles together in
order to connect the latch to the
screw eye.(TIP) Before you squeeze
the poles together make sure that the
poles are straight.
The tension of the fence wil want to
twist the poles away from each other.
Once you have twisted the poles as
straight as you can, grab one pole
and lock it between your thumb and
palm by squeezing it tightly. This will
help prevent the poles from twisting
aeay from each other when you
squeeze them to connect the latch.