Instructions / Assembly

- The electrical installation must be carried out
by
a
specialized
professional
(electrician)
in
accordance with
the
standards and
regulations
in
force
in
the
country
of installation.
- The heat pump circuit must be connected to a
safety
earth circuit at the terminal block.
- The cables must be
properly
installed to prevent interference.
If
damaged,
it must be replaced
by
the manufacturer,
its service agent or
similarly
qualified
persons in order to avoid a hazard.
- The
pump
is intended for connection to a general
power
supply with earth connection.
- Section of the
cable;
This section is indicative and should be checked and
adapted
according
to the needs and
conditions of use.
- The tolerance of
acceptable
voltage
variation is
+/-
10%
during
operation.
The connections must be dimensioned
according
to the power of the device and the state of installation.
Thank
you
for
using
this
mini
pool
heat
pump for
your
pool
t
will
heat
your
pool
water and
keep
the constant
temperature when the air ambient temperature is at
to and the
pool
water temperature is at
This appliance is intended to
be
used by
expert
or trained users
in
shops,
in
light industry and
on farms,
or for
commercial use
by lay
persons
Electrical protection
The
power
supply for the heat
pump
must
come,
preferably, from an exclusive circuit with regulatory protection
components
(30mA
differential
protection)
and
a
magneto-thermal
switch.
12AWG 10AWG 8AWG 6AWG
≮
12A
75219
1