Use and Care Manual

SWIMMING POOL HEAT PUMP
Long press the "
" button for 10s to examine the running parameter, change
the item with the "
and " button to check the measure value.
²
For Example: Display "026.5", it means the inlet water temperature is 26.5
Display"146.5", it means discharge temperature is 46.5
7.2 Operation
²
To increase the temperature
Proceed as explained above using the up arrow
temperature setting 0.5 degree at a time.
² To lower the temperature
Proceed as explained above using the down arrow
²
To display the temperature in
Long press the
key for 10s to switch
² To set running time
Press the
key to enter setting mode
key
and the down arrow key
² To set shutdown time
Press the
key to enter
key and the
down arrow key
² To set the clock
Press the key to enter setting mode, adjusting the value with the up arrow
key and the down arrow key
Figure
24
SWIMMING POOL HEAT PUMP
" button for 10s to examine the running parameter, change
and " button to check the measure value.
For Example: Display "026.5", it means the inlet water temperature is 26.5
Display"146.5", it means discharge temperature is 46.5
℃
To increase the temperature
Proceed as explained above using the up arrow
to increase the
temperature setting 0.5 degree at a time.
Proceed as explained above using the down arrow
.
To display the temperature in
℉ or in ℃
key for 10s to switch
℉ or ℃
key to enter setting mode
,
adjusting the value with the up arrow
and the down arrow key
.
key to enter
setting mode, adjusting the value with the up arrow
down arrow key
.
Press the key to enter setting mode, adjusting the value with the up arrow
key and the down arrow key
.
Figure
16. Parameter Table
Manual
" button for 10s to examine the running parameter, change
For Example: Display "026.5", it means the inlet water temperature is 26.5
℃；
to increase the
adjusting the value with the up arrow
setting mode, adjusting the value with the up arrow
Press the key to enter setting mode, adjusting the value with the up arrow