Use and Care Manual

STEP 4
Figure 4
• Slide 1 pivot ball onto the bottom of each handrail
• Make s
ure both pivot balls are securely fastened to
each handrail. See figure 4
Figure 5
• P
lace the bottom step on the floor facing up
• Hold the ladder assembly straight up and align the
pivot balls with the receivers on the bottom s
tep.
• Push down firmly until both balls are inserted into
the step. See figure 5
STEP 5
Figure 6
STEP 6
Ladder Placement - Figure 6
•
•
Locate ladder in desired position on deck. (A)
M
ake sure base step rests flat against the pool
floor. Swivel step if needed to align with pool floor.
(B)
• Mark location of handrails on deck with a pencil.
• Using a 1 1/2” hole saw, dr
ill 1 hole for each
hand rail through deck surface. (C)
This will ensure that the deck will now support
the ladder.
• Secure hand rails to deck using deck flanges
(D) (flanges sold separately)
Slide flanges over each hand rail, insert
handr
ails through the holes in the deck. Secure
flanges to deck with screws. Secur
e flange to
handrail using set screw.
B
C
D
3