Use and Care Manual
Table Of Contents
-2-
3.
Pipe Assembly
The suction and discharge pipes should have a diameter equal to or greater than that of the
intake tapping of the pump.
Avoid traps as, in addition to affecting efficiency, they impede total overall emptying.
The suction and discharge pipes should not rest on the pump in any case.
Seal all the connectors and unions well. Avoid any dripping on the motor, which would
unfailingly damage it.
Electrical connection
The electrical install action should have a multiple separation system with contacts opening
at least 3mm.
2
1
Controls Prior to Initial Start-up
Start-up