Replacement Part List

19
GB
Stuck Log Procedure
If a log does not split completely and becomes
stuck on the wedge, never attempt to
remove it by modifying the splitter or adding
attachments to the splitter.
Move the control lever to the Reverse positon
and allow the cylinder to retract until the stuck
log contacts the stripper plates. Continue to
retract the cylinder until the log is dislodged
from the wedge.
Neutral position – In this position the cylinder
does not move even though the engine is
running.
Reverse position – Move the lever in this
position to retract the cylinder. Push the lever
fully in this direction to lock it return mode. The
lever will automatically return to the neutral
position once the cylinder fully retracts.
Reverse PositionForward Position
Neutral Position
Reverse Position
Neutral Position
Forward Position
Keep hands and fingers away from
the splitter wedge and log stripper
during cylinder retraction.
Cracks in logs can close quickly
and pinch fingers. Keep fingers
away from any cracks that open in
partially split logs.
Do not use the unit if the stripper
plates are bent or damaged. Bent
or damaged stripper plates must be
repaired or replaced before use.
OPERATION
OPERATION