Replacement Part List

16
GB
Beam Lock Bracket
Pull outward the lock pin and lift up the lifting
handle to transit the beam position from
horizontal to vertical.
Engine On/Off Switch
The engine switch has two positions. OFF -
engine will not start or run. ON - engine will
start and run.
Recoil Starter Handle
The handle is used to start the engine.
Fuel Shut-Off Valve
The fuel shut – off has two position. CLOSED (
) - use this position to service, transport, or
store the unit.
OPEN (
) - use this position to run the unit.
Choke Control
The choke control is used to choke the
carburetor and assist in starting the engine.
The choke control slides between the CHOKE
CLOSED and CHOKE OPEN positions.
Throttle Control
The throttle control regulates the speed of
the engine and will shut off the engine when
it is moved to the STOP position. The throttle
control moves between FAST
, SLOW ,
and STOP positions.
Split Control Handle
The control handle is used to move the
wedge up and down to split logs. The control
handle has three positions: Forward, Neutral,
and Reverse. See the “operation” section for
instruction.
Manual Canister
Keep manuals safely in the canister.
Beam Lock Bracket
The beam lock bracket is used to secure the
beam in the horizontal position.
Lifting Handle
The lifting handle is included for easy transition
from horizontal to vertical.
2” Ball Hitch Coupler
The coupler hitch is at the end of the tongue
and attaches to a tow ball for transportation
purposes.
Log Stripper
The log stripper is designed to remove any
partially split wood from the wedge. This may
occur while splitting large diameter wood or
freshly cut wood.
Log Catcher
A log catcher can be mounted to the beam in
minutes. It is used to hold a split log.
Engine On/Off Switch
Recoil Starter Handle
Choke Control
Fuel Shut-Off Valve
Throttle Control
OPERATION
OPERATION