Replacement Part List

IMPORTANT SAFETY INFORMATION
2
ALWAYS use the splitter on a at and level surface.
ALWAYS check and tighten hardware and assembled parts before operation.
Only use the log splitter for its intended purpose: splitting logs.
DO NOT exceed the maximum permitted log length of 18 inch (46 cm) or the maximum permitted log
diameter of 8 inch (20.3 cm).
ALWAYS split wood in the direction of the grain. DO NOT split wood against the grain.
DO NOT exceed the equipment’s maximum load capacity of 10 tons.
NEVER leave the log splitter unattended while operating the equipment.
Keep area around the log splitter clear of debris to prevent injury.
ALWAYS clear away wood pieces from the work area before splitting another log.
DO NOT tow the log splitter with any motorized vehicles, such as lawn and garden tractors or ATVs.
ALWAYS keep hands and feet clear from moving and cutting parts while operating the equipment.
ALWAYS clear the work area and keep it clean and free of debris when operating the log splitter.
ALWAYS wear safety gear, including eye protection, heavy duty gloves, and steel-toed boots, when
operating the log splitter.
WOOD SAFETY
This log splitter is designed to split standard size logs [max log diameter: 8 inch (20.3 cm); max log length
18 inch (46 cm)]. Do not split oversized logs.
DO NOT attempt to split “hard” wood that requires more than 5 seconds to split.
Check the log prior to splitting to ensure it is free from foreign objects that may be projected or cause
damage to the machine (ie.: nails, wire, etc.).
Ensure that the end of the log is cut square and all branches have been cut ush.
SAVE THESE WARNINGS