Replacement Part List

7
OPERATION
1. Push the fuel switch to “ON”.
STARTING THE GENERATOR
2. Push the chock lever to “OFF”. 3. Move left the throttle lever a little.
4. Start the generator. ROPE HANDLE STARTER: Push the generator switch to “ON”. Pull slightly the
starting rope handle up until feeling anti-action, and then make a rapid pull. Releasing the handle suddenly
may make it hitting the generator. Release the handle slowly conforming to its recoiling force.
ELECTRIC STARTER: Push the generator switch to “START” and remain
there until the generator Start.
CAUTION: Use the generator switch not more than 5 second each time to
avoid damage of the generator. Try once more 10 second later after last
attempt failures. Once the generator starts, reset the generator switch to
“ON”.
1. Preheat the generator and push back the 2.
Set the throttle lever in proper position to ensure
choke lever to “ON”.
2. Set the throttle lever in proper position to ensure
choke lever to the generator runs at required
velocity.