Replacement Part List

8
OPERATION
GENERATOR USE
5.1 Always connect the generator to the earth to prevent misusing. The generator ground terminal is
connected to the frame of the generator, the metal non-current-carrying parts of the generator, and the
ground terminal of each receptacle.
5.2 The user shall integrate the generator with an earth fault supervise system to know that there is a fault
and to track it and eliminate it promptly before a second fault occurs
5.3 The following table gives reference information to connect the electric appliances to generator.
5.4 If the generator is to supply two or more loads with power, be sure to connect them one by one. The one
with the higher start current rst.
When connect the generator to home power supply,
be sure that a skilled electrician does this job.
Improper connecting between the generator and
loads may cause damage to the generator, even a
re.
AC APPLICATION
• Start the engine and make sure the pilot lamp
comes on. If not, the lament may be burnt out.
• Switch on the AC circuit breaker.
• The breaker will automatically switch off when the circuit is short-circuited.
• Plug in the appliance, use three-pronged plugs.
• When operators, maintenance men use or maintain it, please do as the follows to avoid damages to the
human body:
● Please put on the earphones due to the noise from the exhaust system.
● Please put on the overall and gloves as there is a hot component.
When connect or test the electronics, please put on the insulative shoes and gloves in case the electric shock
caused by the touch to the electriferous.