Instructions / Assembly

MINI TRACKED DUMPER
17
GB
If the adjustment bolt has no more
adjustment left, the tracks may have
to be replaced.
Caution: Do not over-tighten your
track. The adjustment of the track
and the brakes are linked. The
braking power will lessen the more
the track is tightened.
Replacing Tracks
Check the condition of the tracks periodically.
If any track is cracked or frayed, it should be
replaced as soon as convenient.
1. Lift up the hopper and insert a support rod
for safety purposes.
2. Lift the machine and set it on blocks or
supports rated for the weight of the machine
so that the tracks are approximately 10 cm
off the ground.
Support Object
M20×180
M20×180
ENGINE MAINTENANCE
Refer to the Engine Manual included in
your unit for the information on engine
maintenance. Your engine manual provides
detailed information and a maintenance
schedule for performing the tasks.
When removing or installing the
tracks, be careful not to get your
fingers caught between the track
and pulley.
Adjust the bolt M20x180 to move the guiding
wheel assembly toward the driving wheels.
Then the track will get loose.
Pull out the loosen tracks .
09737UK00M100_更新回收处理标志.indd 17 2019/9/4 11:01:51