Instructions / Assembly

MINI TRACKED DUMPER
14
GB
3. Once tightness is set, return the jam nut
against the handle to hold the cable in place.
Jam Nut
Adjustment Nut
Adjustment Nut
Jam Nut
Jam Nut
1
2 3
1
Jam Nut
Lock Nut
2 3
Jam Nut
Adjustment Nut
Adjustment Nut
Jam Nut
1
32
Jam Nut
Lock Nut
Adjustment
Nut
Lock Nut
Adjustment Nut
Jam Nut
Jam Nut
Lock Nut
Adjusting Steering
If steering becomes difficult to engage follow
these steps to adjust the cable tension.
1. Loosen the jam nut by turning it counter
clockwise with 10 mm wrench.
2. Tighten or loosen the cable by turning the
cable adjustment nut clockwise or counter
clockwise with 10 mm wrench until you have
reached your required tightness.
3. Once tightness is set, return the jam nut
against the handle to hold the cable in place.
If the above adjustment does not create
enough cable tension, follow the steps below:
1. Loosen the jam nut by turning it counter
clockwise with 12mm wrench.
2. Tighten or loosen the cable by turning the
cable adjustment nut clockwise or counter
clockwise with 10 mm wrench until you have
reached your required tightness.
3. Once tightness is set, return the jam nut
against the handle to hold the cable in place.
Replacing Drive Belt
Remove the knob of the gear selection handle.
Loosen the six M8x20 screws and washers
and take off the guard.
Gear Selection Handle
M8×20 (×2)
M8×20 (×2)
M8×20 (×2)
09737UK00M100_更新回收处理标志.indd 14 2019/9/4 11:01:41