Instructions / Assembly

MINI TRACKED DUMPER
10
GB
Gear Selection Lever
The gear selection
lever has 4 positions:
3 forward speeds and
1 reversefor both high
and low speed.To
change speeds, move
the speed shift lever to
the desired position.
The lever locks in a
notch at each speed
selection.
Hydraulic Tipping Handle
Using your left hand, pull the locking plate
up to release the tipping handle, and hold in
position.
Slower speeds are for heavier loads, while
faster speeds are for transporting light loads
or an empty hopper. It is recommended that
you use a slower speed until you are familiar
with the operation of the mini tracked dumper.
If the engine slows down under a load or the
tracks slip, shift the machine into a lower gear.
If the front of the machine rides up, shift
the machine into a lower gear. If the front
continues to ride up, lift up on the handles.
Always release the clutch control
lever before changing speeds.
Failure to do so will result in
damage to the mini tracked dumper.
Operate the steering levers only at
a reduced speed.
To raise the hopper, pull the tipping handle
upwards (as Ill. B in the figure) until the
hopper has reached the desired position. To
stop raising the hopper, simply release the
tipping handle and return the locking plate to
its original position.
To lower the hopper, first pull the locking plate
up with your left hand to release the tipping
handle, and then pull the tipping handle down
(as Ill. C in the figure) with the right hand.
When the hopper is lowered to the original
position, release the tipping handle back to
its original position and lock securely with the
locking plate.
Locking Plate
A
Hydraulic Tipping Handle
C
B
QUICK CHANGE
Left/Right Steering Lever
Operate the lever to turn left/right.
09737UK00M100_更新回收处理标志.indd 10 2019/9/4 11:01:30