Instructions / Assembly
3
PRODUCT INFORMATION
FILLING WITH GASOLINE AND OIL: ADD OIL BEFORE STARTING THE ENGINE The Power Cart is
shipped without uids installed.
Keep the caps on the fuel and oil lls until you are ready to pour either gasoline
or oil into the correct ll. Oil capacity: 3.6L of SAE 10W30 engine oil.
1. Place the machine on a level surface and initially add 1/2 of the SAE 10W30
high detergent oil into the oil ll and wait one minute for the oil to settle.
2. Check the dipstick and continue adding a few ounces of oil at a time,
rechecking the dipstick until the oil reaches the ll mark. Be careful not to
overll.
3. Fill the fuel tank with fresh, unleaded gas (85+ Octane), to 1/2” from the top of the ll neck to allow for
expansion. Be careful not to overll and reinstall the cap before starting the engine.
Allow the engine to cool for at least two minutes before removing the fuel cap. Use caution as engine oil,
mufer and other components may be hot to the touch. To avoid re danger never add fuel to a hot engine.
Before performing any adjustments to the Power Cart or any maintenance, stop the engine, wait ve minutes
to allow parts to cool. Disconnect the spark plug wire, keeping it away from the spark plug. Contact with internal
rotating parts may cause serious personal injury. Never put hands or feet on or between the track rollers.
FUEL (ANYTIME): 93 UNLEADED 3.6L CAPACITY
ENGINE OIL: FIRST TIME 50HRS, AFTER EVERY 100HRS: SAE10W-30 0.6L CAPACITY
GEAR BOX OIL: FIRST TIME 50HRS, AFTER EVERY 500HRS: GL-4, 1.5L CAPACITY