Replacement Part List

11
MAINTENANCE
CARE AND PREVENTATIVE MAINTENANCE
Check the oil level in the motor crankcase daily.
Check the vibrator oil level weekly.
Inspect the rubber anti vibration mounts for wear or deterioration
Clean the underside of the plate regularly to prevent a build up.
Clean the underside of the plate regularly to prevent build up.
Change the oil in the motor crankcase regularly to minimise wear.
Inspect, clean and/or replace the motor air cleaner regularly, particularly when operating in a dusty
environment.
Inspect, clean and/or replace the spark plug regularly.
Check all fasteners for tightness as the machine is subject to vibration.
Check “V” belt tension. Wear and that it is running well, adjust or replace as required.
VIBRATOR OIL CHECK
1. Place the plate compactor horizontally on a at surface. Make sure the compactor is level when checking
the oil in the vibrator assembly.
2. Check vibrator oil level by removing the plug (vibrator oil gauge).
3. When changing the vibrator oil, remove the drain plug, and simply tip the
compactor to drain the oil. Note that the oil will drain more easily while it
is hot. Inspection and other services should always be carried out on hard
and level ground with the engine shutdown.
INSPECTION AND MAINTENANCE SERVICE TABLES
To make sure your plate compactor is always in good working condition before using，carry out the
maintenance inspection in accordance with Tables 1 through 3
MACHINE INSPECTION SCHEDULE