Use and Care Manual
SAFETY INFORMATION
3 4
SAVE THESE WARNINGS.
• If the tool or charger is damaged in any way.
• If the battery is not charged within the time frame as specied in this manual, turn the charger o.
• Use the battery charger indoors only.
• Do not place the tool or charger on an uneven surface as a fall may cause serious damage.
• Do not operate the charger in a cabinet or other enclosure unless proper ventilation is provided.
• Never place the tool or charger near or over a heat source such as radiator or heater.
• Do not charge batteries or use the tool and battery in locations where the temperature may be below 0°C, or
above 40°C such as inside sheds or metal structures.
• The battery can be charged or operated at temperatures between 0°C and 40°C.
WARNING: Never charge your Lithium-ion battery below or above temperatures recommended as this may
result in re or serious damage to the battery.
• The most suitable temperatures to charge the battery are between 20°C and 25°C.
• Do not place any object onto the charger or allow any object to rest on the charger.
• Make sure that the charger cable is positioned where it will not be stepped on, tripped over or otherwise
subjected to damage or stress. Keep the lead away from operating machinery.
• Do not use an extension cord unless absolutely necessary. The use of an improper extension cord could result
in re or electric shock.
• Never attempt to connect two chargers together.
WARNING: Do not allow water or any other liquid to come into contact with the charger as this may result in
electric shock. Do not position the tool or battery charger near water. Take care not to spill liquid of any kind on
the tool or charger.
• To reduce the risk of electric shock, unplug the charger from the power supply before attempting to clean it. To
clean the tool or charger, wipe with a damp cloth. Use of any other cleaners is not recommended.
• Do not pull on the lead of the charger to disconnect it from the mains power socket.
ADDITIONAL SAFETY INFORMATION RELATED TO BATTERY SAFETY
• Use only the battery supplied with this tool or DOMU Brands approved replacements.
• Do not use the battery to power any device other than the tool it was sold with.
• Charge the battery only with the charger supplied with the tool or approved replacements and according to the
instructions in this manual.
• Do not charge the battery in a place where static electricity is generated, or let the battery touch anything that
is statically charged.
• Handle batteries with care to avoid shorting the battery with conducting materials such as nails, screws, metal
watches, hands, rings, bracelets and keys. The battery may overheat and could cause burns.
• Never attempt to open the battery, puncture the battery, or subject the battery to strong physical shock.
Stop using the product if it exhibits abnormal heat, odour, colour, deformation, or is in an abnormal condition.
If you detect leakage or a foul odour, it is especially important to keep the battery away from re. If battery liquid
leaks onto your skin or clothes, wash well with clean water immediately. If liquid leaking from the battery leaks
into your eyes, do not rub your eyes; rinse eyes well (for at least 10 minutes) with clean water, and consult a
doctor immediately. Never use a leaking battery.
• Always allow the battery to cool down after charging. Do not leave in a hot environment.
• Take care where the tool is stored. Do not store in areas of corrosive fumes, or salt air or similar conditions. Try
to store the tool in the packaging it is supplied in.
WARNING: Never store or leave your Lithium-ion battery in temperatures over that recommended as this may