Use and Care Manual
SAFETY INFORMATION SAFETY INFORMATION
1 2
WARNING! If any part is missing or damaged, do not plug the tool into the power source or install any accessory
until the missing or damaged part is replaced. Failure to follow this instruction could result in serious personal
injury.
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power
tool while you are tired or under the inuence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
• Do not overreach. Keep proper footing and balance at all times. This will enable better control of the power tool
in unexpected situations.
MAINTENANCE & STORAGE
• Maintain the power tool. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may aect the power tool’s operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
• Store idle power tools out of reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
SERVICE
• Have your power tool serviced by a qualied repair person using identical replacement parts only to ensure that
the safety of the power tool is maintained.
IMPORTANT PRODUCT CARE INFORMATION
• This tool uses Lithium-ion battery cells. Care MUST be taken to ensure both the safety and life of the battery is
maintained. Ensure you have read all of the safety information in the previous pages before using the tool.
• Safety devices and circuitry for this tool are located in the battery of this tool. The battery is a vital component,
not just for the power source, but also for the full safety control for both the charging and tool operation.
• Avoid overloading the tool during operation.
NOTE: The battery is more susceptible to overloading when at the lower end of the charge.
ADDITIONAL SAFETY INFORMATION FOR THE CHARGER
• This tool is powered by Lithium-ion batteries which may only be charged with the specically designed Lithium-
ion battery charger purchased with this tool. Do not attempt to charge the battery with any charger other than the
one supplied as this is potentially dangerous.
• Do not plug anything other than the supplied battery into the charger as other objects may touch dangerous
voltage points or short out parts which may result in re or electric shock.
• Before using the charger, read all instructions, labels and cautionary markings on the charger and battery, as
well as the instructions on using the battery.
• Do not use the charger if it has been subjected to a heavy knock, dropped or otherwise damaged in any way.
Take the charger to an authorised service centre for it to be checked and repaired.
DANGER! If the battery is cracked or damaged in any way, do not insert it into the charger.
• Do not attempt to disassemble the charger. Opening or removing covers may expose you to dangerous voltages
or other risks. Incorrect reassembly may result in the risk of re or electric shock.
• If there is a problem with the battery or tool, take it to your nearest authorised service centre. Take the tool or
charger to your nearest authorised service centre:
• If liquid has been spilled into the tool or charger, or if rain or water has touched the tool or charger.
• If the tool or charger does not operate normally after you follow the operating instructions.
• If the tool or charger exhibits a distinct degradation in performance.