Use and Care Manual

16" SCROLL SAWS
14
GB
Store the equipment and accessories in a dark
and dry place at above freezing temperature.
The ideal storage temperature is between 5
and 30°C. Store the electric tool in its original
packaging. Cover the electric tool in order to
protect it from dust and moisture.
TRANSPORT
STORAGE
WIRING DIAGRAM
Danger! The carbon brushes should
not be replaced by anyone but a
qualified electrician.
Carbon Brushes Inspection
In case of excessive sparking, have the
carbon brushes checked only by a qualified
electrician.
1. Be sure turn off the power and pull out the
plug after use.
2. Pull down the transparent blade guard to
prevent hand cutting during transportation.
3. Disconnect the vacuum cleaner and the
other connecting devices, and remove the
connection bolts between the machine and
the work table.
4. Hold the upper end of the U-shaped arm
with one hand while moving; If the saw-blade
adapter & allen wrench (Optional Feature #2)
is on the top of the U-shaped arm, you can
move it with both hands.
5. If the machine is installed with foot switch
(Optional Feature #1), it is recommended to
store it before moving to avoid tripping.
6. Raw materials or precision-cut semi-finished
products are recommended to be removed
from the worktable before moving, which may
damage the saw blade and its fixing device.
PCB
MOTOR
SWITCH
Power Supply Cord
230-240V~, 50Hz
SPEED
KNOB
SWITCH
Power Supply Cord
230-240V~, 50Hz
PCB
MOTOR
FOOT SWITCH
TRANSFER SWITCH
POWER
LIGHT
SPEED
KNOB
65115
65115 with Optional Foot Switch
MAINTENANCE / WIRING