Technical Specifications

FREE-FLOW® QUICK GUIDE
SPECIFICATIONS
© 2005 Race Deck a Division of Snap Lock Industries – Salt Lake City, Utah USA
GENERAL
DESCRIPTION
A. Complete installation of flooring system including
interlocking suspended flooring modular tile and
transition materials.
B. Related work specified under other sections.
1. Surface preparation
2. Thresholds and transitions
QUALITY ASSURANCE
A. Manufacturer of synthetic flooring shall be an organization
specializing in the manufacturing of the products specified
in this section.
B. Products specified in this section shall be installed and/or
supervised by an authorized factory trained representative.
C. Installer shall be liable for all matters related to the
installation of the products described herein for a period
of not less than one year from the date of installation.
SUBMITTALS
A. Specification sheets for products proposed for submission.
B. Submit a sample of specified flooring system showing
color and edging system.
C. Maintenance program and specifications shall be
submitted upon completion of installation.
DELIVERY AND STORAGE
A. General contractor shall provide a clean and dry area
where the materials can be stored until time of installation.
B. Material shall not be delivered on site until all related
work is completed and proper storage facilities can be
secured.
WORKING CONDITIONS
A. Synthetic materials shall not be installed until all other
trades are completely finished in the synthetic flooring
areas.
WARRANTY
A. Snap Lock Ind., Inc. warrants that the materials
supplied shall be free from manufacturing defects for a
period of fifteen (15) years from the date of
installation as set forth in the manufacturer’s standard
warranty.
B. This warranty is expressly limited to the synthetic
flooring materials supplied by Snap Lock Ind., Inc.
This warranty does not cover damage caused by fire,
winds, floods, moisture, chemicals (other than those
used for maintenance specified by manufacturer) nor
does it apply to damage caused by ordinary wear,
misuse, abuse, neglect, faulty building construction
faulty subsurface or site preparation, or unprofessional
installation.
PRODUCTS
MATERIALS
A. RaceDeck® Free-Flow® suspended modular flooring.
1. Open top design shall be 12” x 12” x 1/2”
(304.8mm x 304.8mm x 12.7mm), high impact PP
(polypropylene) suspended floor tile. Weight: 11
oz. (321.29 g)
PRODUCT TEST RESULTS
A. Friction (ASTM C 1028): Dry – 0.75, Wet – 0.56
B. Compression vs. Crush (ASTM D 3998): No Break
C. Noise Reduction Coefficient (ASTM C 423): 5-10%
D. Rolling Load (DIN 18032-02): Pass
E Standard Deformation (DIN 18032-02): 0.9mm
F. R-value: x<1
G. Flatness: 0.0mm
H. Lateral Movement: 0.00” – 0.040”
Snap Lock Industries utilizes certified laboratories for testing that are recognized by the following standards and organizations:
ANSI, ASTM, DIN, NFA, USSL, UL, NFPA
Confidential Document - For Internal Use Only - Snap Lock Ind. ©