User's Manual

Portable Router
PAGE 22 OF 44
Server on this page, the router is set up by default as a DHCP server, which provides the
TCP/IP configuration for all the PC(s) that are connected to the router on the LAN.
¾ DHCP Server: Enable or Disable the DHCP server function, if you disable the server,
you must have another DHCP server within your network or else you must manually
configure the computer IP address.
¾ Start IP Address: This field specifies the first of the addressed in the IP address
pool.192.168.100.100 is the default start address.
¾ End IP Address: This field specifies the last of the addressed in the IP address
pool.192.168.100.150 is the default end address.
¾ Address Lease Time: The amount of time in which a network user will be allowed
connection to the router with their current dynamic IP Address. Enter the amount of
time, in minutes. The user will be leased this dynamic IP address, the default value is
3600 minutes.
¾ Default Domain: (optional) Enter the domain name of your network.
¾ Primary / Secondary DNS - Enter the DNS address provided by your ISP(optional).
3.3.2 DHCP Allocation List
This page displays “Assigned IP”, “Client Name”, “MAC Address” assigned by your
DHCP Server, the page as follows:
From above page, we can see that only one client obtained a IP address from DHCP
Server.