User's Manual

Portable Router
PAGE 20 OF 44
¾ RF Power: Indicates the Power capacity of broadcasting the SSID, the greater the
value, the stronger the single the default value is 100 (maximum).
3.2.4 MAC Filter
This function is use to control the wireless clients access the Internet via wireless MAC
address. The page as follows:
¾ Filter Mode: There are three options: Disable, Only Allow, Only Deny, default value is
Disable, Disable shows that the MAC filtering function is invalid.
z Only Allow -Those wireless MAC clients already added to the list can access the
Internet.
z Only Deny - Those wireless MAC clients already added to the list can not access the
Internet.
¾ MAC Address: The wireless station’s MAC address that you want to filter.
¾ User Name: A simple description of the wireless station.
For example: If you desire the wireless station with MAC address 00:03:25:5A:19:CE,
(username is Gateway) is able to access the router, but other wireless stations cannot
access the router, do as follows:
1. Select “Only Allow” in Filter Mode box.
2. Enter MAC Address in Client MAC Address box
3. Enter “Gateway” in Notes box.
4. Click the Add To List button to add the entry.