User's Manual

Portable Router
PAGE 12 OF 44
Chapter3 Software installation
3.1 Basic Settings
3.1.1 WAN Settings
1. Static IP
If your ISP provides a static or fixed IP address, Subnet Mask, Default Gateway and DNS
setting, please select Static IP, the Static IP settings page will appear, parameters needed
to input including IP Address, Subnet Mask, Default Gateway, MTU, Primary DNS,
secondary DNS, if you don’t know these parameters, please contact with your ISP in local.
¾ IP Address: Enter the IP address in dotted-decimal notation provided by your ISP.
¾ Subnet Mask: Enter the subnet mask in dotted-decimal notation provided by your
ISP, usually is 255.255.255.0.
¾ Default Gateway: (Optional) Enter the gateway IP Address in dotted-
decimal notation provided by your ISP.
¾ MTU: The normal MTU (maximum transmission Unit) value for most Ethernet
networks is 1500 Bytes, it is not recommended that you change the default
MTU size unless required by your ISP.