Operation Manual

Safety
Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents.
• Read the installation instructions before connecting the system to the power source.
• The power supply must be placed indoors.
• This equipment is intended to be grounded. Ensure that the host is connected to an earth ground during
normal use.
• When installing the unit, always make the ground connection first and disconnect it last.
Use only the Xtreamer-supplied combination of power cord, plug, and adapter that shipped with the
equipment, or which you ordered separately. Otherwise, if you use other such supplies, including similar
supplies that Xtreamer might sell for use with similar equipment, you:
• Might damage or destroy data, equipment, or other property.
• Might cause any combination of electrical shock, electrical fire, injury, or loss of life.
• Will void the warranties for Xtreamer equipment.
• Do not work on the system or connect or disconnect cables during periods of lightning activity.
• This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than: 240 VAC, 10A international or 120 VAC, 15A U.S.
• The plug-socket combination should be accessible.
• Installation of the equipment must comply with local and national electrical codes.
• Ultimate disposal of this product should be handled according to all national laws and regulations.