Operation Manual

English

1. Automatically adjust the TV output mode when connected via HDMI cable.

Cycle through available resolutions.

Remote Control Key: TVOUT // Press 2 times consecutively

2. . Connect Component / Composite cable

Please note that video might suffer when connected via analogue.

Remote Control Key: TVOUT // Press 2 times consecutively

Different regions use different output standards:

-- PAL(B) : HDMI Auto, 576P 50Hz, 720P 50Hz, 1080i 50Hz, 1080P 50Hz

Europe, South Africa, Middle East, China, Austria, India

-- NTSC : HDMI Auto, 480P 60Hz, 720P 60Hz, 1080i 60Hz, 1080P 60Hz

Korea, Japan, US, Canada, Taiwan, Philippines, Colombia

1. Adjusting output mode with TV output and Video output

2. Select OSD language menu (default : English)

Select the OSD language.

Setting  System  Menu Language  Select

3. Select subtitle\ID3-Tag encoding(default : Unicode(UTF8) )

Select the subtitle code.

Setting  Playback  Subtitle / ID3-tag  Select.

4. Select Audio Output. (default : DTS / Dolby D 2.1CH)

Select the audio setting as your audio system.

Use Only TV (Downmixing)

Setting  A/V  Digital Output  DTS / Dolby D 2.1CH)

Using amplifiers (Pass Through)

Setting  A/V  Digital Output  DTS / Dolby TrueHD/Dolby D+

Settings

Initial setting