Operation Manual

Xtreamer DisplayPod USB to HDMI

Adapter User’s Manual
27
Manually Setting
In mirror mode, the adapter will automatically select the settings (screen resolution, color
quality and refresh rate) for the secondary monitor. But you can manually adjust the
settings as required. However, the settings of the secondary monitor are limited by that of
the primary monitor. For example, even though your secondary monitor supports a
resolution of up to 1920x1080, you can only configure it to use 1280x1024 due to the
primary monitor only supports a resolution of up to 1280x1024.
Be the Primary Monitor
To make the secondary monitor the primary display:
1. Position the mouse anywhere on your computer desktop, right-click and select
Screen Resolution on Windows

7, Personalize > Display Settings on Windows
Vista

or Properties > Settings on Windows

XP.
2. In the Display drop-down menu, select the option ends with DisplayPod Graphics
Adapter.
3. Check the This is my main monitor box on Windows

7/ Windows Vista

or Use
this device as the primary monitor box on Windows

XP.
On some PCs and laptops it is necessary to disable the main display (i.e. uncheck
the Extend the desktop onto this monitor or Extend my Windows desktop
onto this monitor box for the main display) as part of the same settings change.
4. Click OK to close the settings screen.
The add-on monitor stays primary if the PC enters hibernate or suspend mode or is
rebooted. If the add-on monitor is unplugged, the main display becomes primary again.