Installation Instructions

TS100 tire pressure sensor detail sketch
Every time tire servicing or teardown or TS100 tire pressure sensor
teardown or replace，must use our parts to replace rubber washer、
washer、nut and valve core，make sure sealing good.
If it is external damage，must replace TS100 tire pressure sensor.
Correct TS100 tire pressure sensor nut torque：4Nm。
Attention
TS100 tire pressure sensor technical parameters
TS100 tire pressure sensor weight
（Do not contain cycle valve）
13.8 g
About 46.4*25*16.2mm
900 kPa
Boundary dimension
Maximum pressure
Valve cap Nut
Sensor subject
Retaining
screw
Cycle valve
Rubber sealing circle
Valve core module