Operation Manual

6
MB8.5 Indoor Cycle
Handlebar
3
Hardware Step 3
#49. 5/16” Split
Washer (4 pcs)
#48. 5/16” x 16mm
Flat Washer (4 pcs)
#88. 5/16” x 5/8”
Screw (4 pcs)
1. Attach the handlebars (make sure they are oriented as in the illustration)
with four Screws (88), four Split Washers (49), and four Flat Washers
(48). Tighten rmly using the Combination M5 Allen Wrench & Phillips
Head Screw Driver (86).
Water Bottle Holder
4
1. Place the water bottle slightly to the right of center when looking at the
bike from the rear.