Instructions / Assembly

1. Turn on/off the control panel.
2. Short press this button to turn the sauna on and off. Long press this button to
switch ℃&℉.
3. When the sauna working, + / - adjust the temp (up to 65℃/149℉). When the
FM/AUX on, + / - adjust the channel. When the BT/USB on, + / - change the song.
4. When the sauna working, + / - adjust the time (up to 90 mins). When the
FM/AUX or BT/USB on, + / - adjust the volume.
5. Short press to enter the FM mode for 5 seconds. Long press to enter the AUX
mode for 5 seconds.
6. Short press to enter the Bluetooth mode for 5 seconds. Long press to enter the
USB mode for 5 seconds.
7. Press color light to activate the chromotherapy light system. After manually
switching the all color of the color lamp this system will enter an automatic cyclic
mode.
1
3
4
5
6
7
8
9
2
10
11
image 4
image 5
Step 5: Place the Bench Surface Panel
image 6
Step 4: Position the Right Side Panel
Place the right panel into the slot of the floor
panel and push it towards the rear panel. Please
check if there is almost no visible gap between
the outside and the inside of the sauna, then it is
already fixed. (image 4)
Place the Bench Support panel (image5&6) and connect the wires behind
(image7&8). Each two wires have corresponding unique interface shape,
hear a click to indicate that the connection is completed.
image 7
image 8
7
4
Control Panel Instruction