Instructions / Assembly

WARNING: Pay attention to the risk of electric shock. Don’t connect the power

supply until all wires are properly connected.

Other Functions Specification

Reading lamp

Congratulations! Installation completed!

Plug in and power on to enjoy your sauna!

Colour lamp

Bluetooth

Vent

:SAUNA BT

Step 6: Place the Bench Surface Panel

Please put the bench surface panel in place.

Step 7: Place the Front Panel

Place the front panel into the slot of the

floor panel and push it towards the side

panels. Then go inside the sauna and

check if the gap is almost invisible.

Step 8: Install Ceiling Panel

Place the ceiling on top of the sauna. Make sure that all panels are in the slots

in the ceiling panel. Make sure that all wires on the side panel pass through the

holes. Finally, connect all the wires in the ceiling panel.