Instructions / Assembly

 Schematic diagram of expansion screw

You could install the expansion screw at the Step 1. It is installed to

prevent wind.

 Attach Floor Panel to Surround Panels

There are 12 screws for fastening floor panel to surrounding panels.

You could install them at the Step 4&7.

Step 4: Position the Right Side Panel

Place the right panel into the slot of the floor

panel and push it towards the rear panel. Please

check if there is almost no visible gap between

the outside and the inside of the sauna, then it is

already fixed. (image 4)

image 4

Place the Bench Support panel (image5&6) and connect the wires behind

(image7&8). Each two wires have corresponding unique interface shape,

hear a click to indicate that the connection is completed.

image 5

Screw Fixation

Step 5: Place the Bench Surface Panel

image 6

image 7

image 8