Instructions / Assembly

Step 8: Install Ceiling Panel and connect the wires

Place the ceiling on top of the sauna. Make sure that all panels are in the

slots in the ceiling panel. Make sure that all wires on the side panel pass

through the holes. Finally, connect all the wires in the ceiling panel.

Step 7: Place the Front Panel

Place the front panel into the slot of the floor

panel and push it towards the side panels.

Then go inside the sauna and check if the

gap is almost invisible.

Step 6: Place the Bench Surface Panel

Place the bench surface panel (image9), and connect the connecting

wire of the light strip on the bench surface panel with the wire behind

the bench support panel (image10).

image 10

image 9

image 11

Step 9: Install the Roof Panel

Finally, install the roof panel, and plug in the power on to operate the

Sauna.

Congratulations! Installation completed!

Plug in and power on to enjoy your sauna!