Instructions / Assembly

 Attach Ceiling Panel to Front & Rear Panels

There are 4 screws for fastening ceiling panel to front & rear panels.

You could install the expansion screw at the Step 8.

 Attach Roof to Front & Rear Panels

There are 4 screws for fastening roof to front & rear panels. You could

install the expansion screw at the Step 9.

WARNING: All screws are used to fix the sauna room. The sauna room cannot be

moved after the screws are installed. If you need to move or disassemble the sauna

room, you need to remove the screws.

Step 1: Position the Floor Panel

Place the floor panel on a flat surface.

Before assembly, make sure the floor is flat

so that you can maintain a comfortable

subsequent installation. (image1)

image 1

Step 2: Position the Rear Panel

Lift the rear wall into position wedging the

bottom of the wall into the channel in he floor

panel, you can gently rest the back wall against

the wall of your home. Please note the two

holes are closer to the rear panel. (image 2)

image 2

Step 3: Position the Left Side Panel

Place the left panel into the slot of the floor

panel and push it towards the rear panel. Check

whether the hooks of the fasteners are up or

down, and the fasteners are connected together

as shown. (image 3)

image 3

2 pcs