Instructions / Assembly

 Schematic diagram of expansion screw

You could install the expansion screw at the Step 1. It is installed to

prevent wind.

 Attach Floor Panel to Surround Panels

There are 18 screws for fastening floor panel to surrounding panels.

You could install them at the Step 5.

Step 4: Position the Right Side Panel

Place the right panel into the slot of the floor

panel and push it towards the rear panel. Please

check if there is almost no visible gap between

the outside and the inside of the sauna, then it is

already fixed. (image 4)

Image4

Screw Fixation

Step 5: Place the Front Panel

You should place the front panel into the

slot of the floor panel and push it towards

the side panels. And go inside the sauna

and check if the gap is almost invisible.

Then you could place the bench support

panel in right place.

Image5

Step 6: Place the Bench Support Panel and connect wires