User's Manual

Document MV0319P.N

MVN User Manual

It is important to note that when a reset is carried out, the subject should stand still in a magnetically

clean environment. Depending on the rest, some time is needed to build up good history again.

Character Reset (menu > Tasks > Character Reset, or Ctrl+Alt+F): This command partially resets the

filters, but keeps valuable information that was stored; the result is that the character will remain in its

horizontal position, and a shorter stabilization period is required (up to 30 s).

Full Reset (menu > Tasks > Full Reset, no shortcut key): This command will completely clear the filters.

This means that all previous knowledge that the system built up will be lost. The character will return to

the origin and a stabilization period is required. This means that the subject should walk around slowly

for about 30 seconds to a minute.

9.1.4 Real-time graphs

With an MVN BIOMECH license it is possible to view graphical representation of data even in real-time

and during recording.

To do this, click the graph icon, and as with offline graphs, click and drag items from the Navigator.

Figure 40: Real-time graphs

Figure 40 is a screenshot of MVN Studio with real-time graphs present. The key difference with this and

the offline graphs is the lack of time bar.

The real-time graphs have the same functionality as offline, for more information on graphs, see

Section 11.1.

Note that it is possible to zoom on the vertical axis. First ensure that “no auto-scaling is selected from

the drop down menu, and then select the magnifying glass icon to zoom. However given that it is not

possible to select a time window over which to observe the real-time graphical data, the recommended

setting during real-time preview is “Expand to fit”, or “Full Fit”.