User's Manual

Document MV0319P.N

MVN User Manual

7.5 Configuring the Sync Station

The Sync Station is dedicated hardware for synchronizing between MVN BIOMECH Link and third party

systems. The user will note that when MVN BIOMECH Link is selected, the text beside Sync Settings

states “Not sync capable”. The Sync Station must be inserted for synchronization with MVN BIOMECH

Link.

Click to configure the sync settings. For details about each setting, refer to Section 23.

7.6 Configuration Group

It can be expected that there are multiple users of a given MVN system, or that certain users have a

certain set up that is always in use. In this case, it is possible to group a set of configurations into group

configuration. This can be done in a number of ways:

1. Once all configurations are in the list; select them, then right click and select “Group”.

2. Right click on the first MVN System and select ‘Group’. This configuration will then be collapsed into

a Configuration Group labeled ‘New Group’. Click and drag remaining items into the group.

It is advised to rename the group from “My Configuration Group” to match the group contents. By

toggling the Enable button from ‘Off’ to ‘On’ for the Configuration Group, all items in the Group will also

be enabled.

7.7 Loading configurations using the Library Button

To save configurations (grouped or otherwise), open the Library pane by clicking on the icon “>>Library”,

then click and drag the items into the Library.

To retrieve a saved configuration, click and drag the items (or group) from the library into the Current

Configuration window.