User's Manual

Document MV0319P.N

MVN User Manual

a. Press this button to power on or off the system.

9. Power (DC-IN) port

a. Insert the bundled AC adapter into this port and connect your router to a power

source.

12. LED On/Off button

a. Press this button to turn on/off the backlight LED on the panel.

13. LAN 1 ~ 4 ports

a. Connect network cables into these ports to establish LAN connection.

14. Reset button

a. This button resets or restores the system to its factory default settings

5.6.1 Positioning the Access Point

For the best wireless signal transmission between the wireless router and the network devices

connected to it, ensure that you:

 Place the wireless router in a centralized area for a maximum wireless coverage for the

network devices.

 Keep the device away from metal obstructions and away from direct sunlight.

 Keep the device away from 802.11g or 20MHz only Wi-Fi devices, 2.4GHz computer

peripherals, Bluetooth devices, cordless phones, transformers, heavy-duty motors, fluorescent

lights, microwave ovens, refrigerators, and other industrial equipment to prevent signal

interference or loss.

 To ensure the best wireless signal, orient the three detachable antennas as shown in the

drawing below.

Note: If the AP is connected to the computer through the supplied Ethernet to USB adapter, it will not

function when a “Selective Suspend” power management feature is enabled on the PC/Laptop being

used for recording. When the AP is used with “Selective Suspend” turned ON, the computer may hang

during shutdown or possibly not shutdown correctly. You must therefore disable power management for

the USB hub to prevent this. To do this, follow these simple steps:

From the Start Menu >Right click on Computer >Manage >Device Manager >Universal Serial Bus

Converters >Right click on USB Root Hub >Properties >Power Management.

Uncheck the box “Allow the computer to turn off this device to save power.” OK your way out.

NOTE: Doing this may significantly reduce laptop battery life.