User Manual

11.8.5.2 Software Setup in MT Manager

Synchronisation on Sync Out Line 1:

Sync Out

 Select Start Recording

 Check the check box for Line 1

 Polarity: Rising Edge

 Trigger Once: Uncheck

 Skip first = 0

 Skip factor = 0

 Pulse width = 10 ms

 Select Stop Recording

 Check the check box for Line 1

 Polarity: Rising Edge

 Trigger Once: Uncheck

 Skip First = 0

 Skip Factor = 0

 Pulse width = 10 ms

 Set up the wireless configuration in MT Manager.

11.8.5.3 Software Setup Noraxon MyoResearch Software:

The example given below is for is gait analysis, measuring the medial gastrocnemius, tibialis

anterior, semitendinosus and the rectus femoris. For an 8-Channel EMG system, Channel 9 is

selected as the synchronisation line in the Noraxon MyoResearch Software. If a 16 channel

system is in use, this is the 17th channel.

Return to the main menu,

under >Measuring

Options, go to >Recording

Options, then >Triggering

tab.

 Check the check box beside “Start Recording”;

 Go to the drop down menu beside “When Channel”, select “Sync”;

 Select Rises Above (ensure that this is also the direction indicated on the mini-

receiver);

 Input e.g. 0.5V

 Longer than 5ms

 Repeat settings for Stop Recording.

 Navigate further through the software.