User Manual

© Xsens Technologies B.V.
17
5 Recommended workflow
To start up, the Awinda Master
must be plugged into the USB
port of the PC.
The ID of the Master and
docked MTw’s is displayed in
the device list. See 0.
Go to wireless configuration.
Select a radio channel and
switch the radio on (enable).
See 6.5.
When an MTw is undocked, its
radio looks for a station to
connect to.
The wirelessly connected MTw’s
appear in the list.
When all required MTw's are
connected, set the update rate
and either make operational or
enter measurement mode
directly.
See 6.5.6 for selecting the best
update rate.