User Manual

4.4 Click-in Body Straps

The MTw Click-in body straps have been designed to ensure that the user can enjoy as much

flexibility as possible. The user may first insert the MTw into the strap, then fasten the strap

to the body (recommended). Alternatively, prepare the subject by first attaching the straps,

to the body locations, then insert the MTw’s at the appropriate locations.

4.4.1 Putting MTw’s into Strap Holders

Each system is supplied with a series of stickers, with the ID of the MTw printed. The user

can use this to fix to the MTw holder on the straps, to enable the user to remember more

easily where each MTw is fixed on the body. The user can also set a numerical Location ID in

MT Manager Device List (Section 6.4.2) to code Location ID to, e.g., body segments.

To put the MTw into the holder of the straps, slip the

MTw, gently into the “cup” of the holder.

Press the clip of the MTw against the MTw housing.

Press the MTw vertically into the housing.

Release the clip into the clasp of the holder. Take care to

ensure that the MTw is completely and firmly

restrained.

4.4.2 Putting on the Straps

It is possible for the user to put the straps onto their own body segments, however, to

ensure tight and stable fit, it is advisable to have someone else fasten them.

 Before each use, pre-stretch the straps to remove any initial stiffness.