User Manual

© Xsens Technologies B.V.
12
4.2.2 Awinda Station Status LED
The Awinda Station has five LED indicators. From right to left, these indicators are:
LABEL
LED
DESCRIPTION
CHRG
[CHaRGer
functionality]
OFF
When no mains power supply is connected to the Awinda Station.
GREEN: When 12V power supply is connected (mains power
supply).
STAT
[STATus of the
Awinda
Station]
OFF
OFF: When no USB connection is present and when MT Manager is
not started.
GREEN: Both USB connection present and MT Manager running
connected to driver.
ORANGE: USB connection to host PC is present.
RED: Only power supply connected or error has occurred, e.g., a
short-circuit of an MTw.
EXT
OFF
Remains off unless external connection made.
GREEN: External connection e.g. sync port.
CONN
OFF
OFF: No wireless connection.
GREEN slow blinking: (1 blink per second), radio switched on. When
MTw connects, MTw LED and CONN LED blink synchronously.
Fast blink: Measurement Mode.
DATA
OFF
OFF: No data received.
GREEN: Measurement mode.
ORANGE: Flushing. Flushing is the action of transferring data that
has been stored on the MTw buffer, while the MTw was out of
range and unable to transfer data in real-time to the Awinda
Station.
RED: Recording mode is active. This allows the remote monitoring
that the host PC has initiated a recording successfully.
Note: The power supply is needed to charge the MTw’s or to change from power off to
power on. Only the power supply is needed for charging purposes (USB is not needed in this
case). Power supply and USB connection are required for firmware updates.
Power supply is not needed for wireless communication (e.g. measurement/recording).
4.3 Awinda USB Dongle
See 11.3 for more technical specifications of the
Awinda USB Dongle.