User Manual

© Xsens Technologies B.V.
11
4.2 Awinda Station
Front view of the Awinda Station, showing the LEDs. A
description of the LEDs are described in Section 4.2.2
below. On top are docking spaces for 6 MTw’s with
regressed micro USB connectors. On the side is a
foldable and rotatable 2.4 GHz antenna for maximum
range.
Back view of the Awinda Station, showing the DC
power connector, the USB connector and 4 BNC sync
I/O connectors for synchronisation with external
devices
1
. See 11.2 for more technical specifications of
the Awinda Station.
4.2.1 Awinda Station Synchronisation Ports
On the back of the Awinda Station there are four BNC ports, two Sync In ports and two Sync
Out. The ports have been configured to send (Sync Out) or receive (Sync In) TTL pulses 0-
3.3V. For software configuration of the synchronisation channels, see Section 6.7.
1