XB4 4WD Buggy Kit - Manual

2x
L=R
50
➍
Before cutting and making holes on the BODY, put the unpainted body on the chassis to
confirm the mounting position and location for holes and cutouts. Before cutting and making
holes on the WING, put the unpainted wing on the wing holders to confirm the mounting
position and location for holes and cutouts.
Before painting, wash the inside of the body with mild detergent, and then rinse and dry
thoroughly.
Mask all windows.
➊
➋
➌
➎
➏
➐
➑
Apply paint masks as appropriate.
Paint the body using paints formulated for polycarbonate bodies.
When the paint is dry, remove the masking.
Carefully cut out the body using appropriate scissors or cutting tools.
When you have finished cutting, peel off the external protective films.
8. FINAL ASSEMBLY
Double-sided Velcro™ tape is
used to seal the body against
the side guards.
VELCRO™ TAPE WITH DOUBLE-SIDED TAPE
(Velcro™ tape - hook side)
(Velcro™ tape - soft side)
DIRTCARPET
XRAY LEXAN BODY
#369708 0.75mm GAMMA 4C INCLUDED
#369709 0.50mm GAMMA 4CL OPTION
#369710 0.75mm GAMMA 4D INCLUDED
#369711 0.50mm GAMMA 4DL OPTION
BODY REAMER (HUDY #107602)
BODY REAMER (HUDY #107602)
LOW TRACTION Cutting line
LOW TRACTION Cutting line
XB4 GAMMA 4C BODY
XB4 GAMMA 4D BODY
HIGH TRACTION Cutting line
HIGH TRACTION Cutting line
DIRT
CARPET
SCISSORS
(HUDY #188990)
SCISSORS
(HUDY #188990)