XB4 4WD Buggy Kit - Manual

47
8. FINAL ASSEMBLY
902310
SH M3x10
Adjust the motor so the pinion meshes with the spur gear properly.
Make sure the gear mesh is not too tight.
There should be a small amount of play between the teeth of the
pinion gear and the spur gear.
➊ Adjust gear mesh.
➋ Tighten the screw.
➊
➊
➊
➋
➊
Loosen the screw.
➋ Insert motor into the bulkhead.
➊
➋
DIRTCARPET
➋
➌
➊
NOTE
ORIENTATION
NOTE
ORIENTATION
Motor
(NOT INCLUDED)
INCORRECT
CORRECT
Pinion
(NOT INCLUDED)
PINIONS
#365718 18T / 48P
#305919 19T / 48P
#294020 20T / 48P
#294021 21T / 48P
#294022 22T / 48P
#294023 23T / 48P
#305924 24T / 48P
#365725 25T / 48P
#365726 26T / 48P
#365727 27T / 48P
#365728 28T / 48P
#365729 29T / 48P
#365730 30T / 48P
#365731 31T / 48P
#365732 32T / 48P
#365733 33T / 48P
#365734 34T / 48P
#365735 35T / 48P
#365736 36T / 48P
#365737 37T / 48P
#365738 38T / 48P