XRA350013 XB8 2018 Nitro Buggy Manual

➍

Before cutting and making holes on the body, put the unpainted body on the chassis to confirm the

mounting position and location for holes and cutouts.

Before painting, wash the inside of the body with mild detergent, and then rinse and dry thoroughly.

Mask all windows.

Apply paint masks as appropriate.

Paint the body using paints formulated for polycarbonate bodies.

When the paint is dry, remove the masking.

Carefully cut out the body using appropriate scissors or cutting tools.

When you have finished cutting, peel off the external protective films.

➊

➋

➌

➎

➏

➐

➑

12. FINAL ASSEMBLY

Cut the silicone tube depending on engine and muffler. Use the plastic clips to hold the tubes together.

SILICONE TUBE MARKED AS

BLUE = FROM FUEL TANK TO CARBURETOR

SILICONE TUBE MARKED AS

RED = FROM MUFFLER TO FUEL TANK (TOP)

Keep fuel line away from

clutchbell and flywheel.

902308

SH M3x8

Apply #106240 HUDY air filter oil

and follow the engine instructions

to service the air filter.

#358832

AIR FILTER RAIN COVER

Body Reamer (HUDY #107600)

Ensure to make this rear body

mount hole oval so in the case of

chassis flex after a big jump the

body mount will not tear up the

hole.

DETAIL

#359712

BODY HIGH-SPEED - LIGHTWEIGHT

To reinforce the body or to fix broken

body use #106280 HUDY BODY FIX