XRA350013 XB8 2018 Nitro Buggy Manual

22
CAMBER
TRACK-WIDTH
ROLL CENTER
357256
SHIM 6x13x1
357256
SHIM 6x13x1
L=R
L=R
PIVOT BALLS MUST MOVE FREELY
During initial assembly, tighten each hex nut until the
pivot ball starts to bind, then loosen slightly. Verify that
the pivot balls move freely.
ALU pivot ball
BLACK color
STEEL pivot ball
SILVER color
2x
2x
DETAIL
Tighten hex nuts using HUDY
tool #107581
L=R
2x
6. FRONT SUSPENSION
#357253 Brass Adjusting Nut M15x1
1mm
1mm
1mm
2.5mm
2.5mm
HUDY Tool Allen 2.5mm
HUDY Tool Allen 2.5mm
BOOK
SET-UP
BOOK
SET-UP
For maximum performance in most track conditions, we
recommend using the following basic setting.
Use only one from the inner positions
in the upper roll center bushing.
Use only one from the inner positions
in the lower roll center bushing.
2mm
1mm
L=R