XRA350013 XB8 2018 Nitro Buggy Manual

16
4. REAR SUSPENSION
CAMBER
353370
SHIM 3x9x1
353353
SHIM 3x9x7
353370
SHIM 3x9x2
960030
N M3
902318
SH M3x18
902330
SH M3x30
960030
N M3
Ensure that the rear upright moves freely.
If it does not move freely, use sandpaper
to thin both wheelbase adjustment shims.
Shims for wheelbase
adjustment
2mm
Do not overtighten the self-locking nut.
Overtightening may result in suspension binding.
If the rear upright does not move freely, use a HUDY Arm Reamer to resize the hole.
ARM REAMER
1+1mm
INITIAL SETTING
(HUDY #107633)
2x
L=R
Check for free
movement
DETAIL
DETAIL
2x
2x
L=R
L=R
RIGHT
THREAD
LEFT
THREAD
OIL
OIL
RIGHT THREAD RIGHT THREADLEFT THREAD LEFT THREAD
26.5mm
7mm
26.5mm
NOTE ORIENTATION
NOTE
ORIENTATION
INITIAL SETTING
DETAIL
DETAIL
INITIAL SETTING
L=R
NOTE
ORIENTATION
3x18mm
3x30mm
BOOK
SET-UP
DETAIL
Use tools to tighten as shown
Special Tool for all turnbuckles & nuts (HUDY #181090)
or Turnbuckle Wrench 5mm (HUDY #181050)
Install the pivot balls with Professional
Multi Tool (HUDY #183011)