XRA370010 X12 2019 Pan Car US & EU Manual

18
DIFFERENTIAL
NOTE
ORIENTATION
This nut affects the tightness and
stiffness of the rear differential.
Tighten the nut gently so the diff
does not slip under power, but do
not overtighten or the diff balls
and/or plates may be damaged.
IMPORTANT
3x5x0.5mm
3x5x0.5mm
The thickness of shims used affects
the ride height of the car, so
determine the proper amount of
shimming based on tire diameter.
IMPORTANT: Always use the
same thickness of shims on both
left & right sides.
For INITIAL SETTING, use (2x)
3x5x0.5mm on both left & right
sides.
Optionally included: (4x)
3x5x0.25mm shims for fine tuning.
A SHORTER car rotates harder in slow corners and has improved forward traction.
A LONGER car is more free in high-speed corners and will feel more linear, especially
during fast direction changes.
Bearing Oil
(HUDY #106230)
OIL
0.5mm or 1.0mm Do not use for basic set-up
6.4x8.4x6mm
Must be used always.
NOTE
ORIENTATION
NOTE
ORIENTATION
NOTE
ORIENTATION
Diff Grease
(HUDY #106211)
Bearing Oil
(HUDY #106230)
Diff Grease
(HUDY #106211)
OIL
Bearing Oil
(HUDY #106230)
OIL
Diff Grease
(HUDY #106211)
Diff Grease
(HUDY #106211)
8.0mm
7.8mm
3.0mm
3.2mm
To set track-width, use the hole in the carbon pod plate as the
centre point; this hole should always be centred between the two
rear wheels once overall track-width is set. To set the track-width
more easily, set the car on a ruler or use a digital vernier caliper.
Rear track-width is directly affected by wheel offsets, which can
vary depending on tire brand.
LEFT = RIGHT
DETAIL
Flanged
DETAIL
The axle must have a VERY small
amount of side play. If there is no
side play, the axle may bind and
damage the ball-bearings.
DETAIL
4. BALL DIFFERENTIAL
951438
BB 1/4“x3/8“x1/8“
375090-O
6.4x8.4x1.0
375093-O
6.4x8.4x6.0
375090-O
6.4x8.4x0.5
908258
SCH M2.5x8
930138
BA 3x8
941438
BB 1/4“x3/8“x1/8“
930130
B 3.1
963030
ST 3x8
960031
ALU N M3
375390
ALU SCH M3x8
303142-O
SHIM 3x5x0.5
303143
SHIM 3x5x0.25
SPUR GEARS
#375872 72T / 64P OPTION
#375875 75T / 64P OPTION
#375876 76T / 64P OPTION
#375878 78T / 64P OPTION
#375880 80T / 64P OPTION
#375896 96T / 64P INCLUDED
#375012
STEEL REAR AXLE SHAFT HUDY SPRING STEEL™
Optional steel rear axle offers better durability as it will
not break even in serious crashes, however add extra
weight and decreases slightly steering response
#373042
ALU UPPER ECCENTRIC CLAMP
Wheelbase adjustment
Rearward position
Standard position
(+1mm)
(0mm)
Frontward position
(-1mm)
SHORTER
LONGER
Flanged