XRA370010 X12 2019 Pan Car US & EU Manual

1. FRONT SUSPENSION
10
RIDE HEIGHT
TRACK-WIDTH
901304
SB M3x4
2x
2x
2x
Use the proper matching bushings to achieve the desired front track-width
LEFT RIGHT TRACK-WIDTH
-1mm
-0.5mm
0mm
+0.5mm
+1mm
169mm
168mm
167mm
166mm
165mm
+
=
The X12 has adjustable front track-width. There are 3 different bushings - 0mm centric (included in kit), or 0.5mm or 1.0mm eccentric (optional). Use the same bushing in front
and rear, and also use the same (mirrored) orientation of the bushing on both right and left sides.
INITIAL SETTING
The number of washers used
affects the ride height of the car, so
determine the proper amount of
shimming based on tire diameter.
INITIAL SETTING
0.4mm washer (#372293 - BLACK)
0.2mm washer (#372292 - SILVER)
0.6mm washer (#372294 - GOLD)
DETAIL
901304
SB M3x4
NOTE ORIENTATION
CASTER
3x10mm
3x8mm
5.3x7.8x0.5mm
3x6x0.5mm
REACTIVE CASTER SETTING
= 2.5°
= 5° INITIAL SETTING
= 7.5°
UPPER ARM POSITION ADJUSTMENT SHIMS
The shims influence the camber gain change.
MORE shims = less camber gain, reduced initial
steering, reduced steering sensitivity (less twitchy).
LESS shims = more camber gain, increased
initial steering, increased steering sensitivity.
Use same shim thickness on both left & right sides.
902310
SH M3x10
902308
SH M3x8
373120-O
SHIM 5.3x7.8x0.5
303121-O
SHIM 3x6x0.5
Tighten Gently
903306
SFH M3x6
903306
SFH M3x6
902306
SH M3x6
ALU ECCENTRIC BUSHINGS
#372330-O 0mm INCLUDED
#372331-O 0.5mm OPTION
#372332-O 1.0mm OPTION
(INITIAL SETTING)
ALTERNATIVE FRONT POSITION
Long wheelbase
ALTERNATIVE REAR POSITION
Short Wheelbase
FRONT WHEELBASE ADJUSTMENT
This position has the same wheelbase as the previous
X12 car as recommended for bigger tracks and tracks
with longer sweepers.
Shorter wheel base allows the car to rotate better right
in the center of the corner to maintain corner speed and
therefore it is recommended to use on tight technical tracks
or tracks with many 180 degree corners