Manual

3. Now click Tools > Colour Management, you will see the Colour Management Dialogue Box appear as shown below.
Firstly, make sure that the Orange/Grey arrows are highlighted as above. To select or deselect an arrow, click directly
on the arrow itself. Also select RGB under the ‘Color mode used for effects:’ option (1).
Make sure that the drop down option below the centre circle shows ‘Internal RGB - Fraser (1998)’ (2), and the drop down
option below the printer to the left hand side states ‘ ' (3).Subli_Print_SG3110DN_CLASSIC_V1.0
10
CorelDRAW 10 - X4 Setup
1
1
3
2
Subli_Print_SG3110DN_CLASSIC_V1.0
4
Now click the “Three Circles” icon (4). This will open the Advanced Settings window.
Match your settings to those shown below:
a. Rendering Intent: Perceptual
b. Color Engine: Microsoft ICM CMM
c. Click OK to continue
a
b
c